Hey guys this is second blog and in this blog I am going to show you HOW TO SOLVE A 3*3 RUBIK'S CUBE IN 1 MINUTE.
Basically in the beginners method there are 7 STEPS. So first I will tell you all the steps.
THE 7 STEPS ARE :
1) BOTTOM CROSS
2) 1st LAYER
3) 2nd LAYER
4) TOP CROSS
5) TOP CROSS ORIENTATION
6) CORNER PLACING
7) CORNER ORIENTATION
Now lets discuss the steps :
BOTTOM CROSS : Make a cross on the bottom edge with the correct orientation.
1st LAYER : Complete the first layer by inserting corners.
2nd LAYER : Complete the second layer by inserting the edges.
TOP CROSS : There are 4 cases - A DOT
- L SHAPED
- A LINE ( KEEP IT HORIZONTALLY )
- CROSS ALREADY MADE
Just use this algorithm to make the cross - F R U R' U' F'
TOP CROSS ORIENTATION : There are 2 cases - TWO EDGES MATCHING DIAGONALLY
- TWO EDGES MATCHING IN A LINE
For 1st case keep the 1st edge on back and 2nd on right and use the algorithm - R U R' U R U2 R'
For 2nd case keep the line in horizontal position and do this algorithm - R U R' U R U2 R' then you will get the 1st case.
CORNER PLACING : Use this algorithm twice or thrice to get all the corners at the correct place but not in correct orientation. - U R U' L' U R' U' L
CORNER ORIENTATION : Keep the corner on right side and do this algorithm and the do U or U' to bring the next corner. - (R' D' R D) (R' D' R D)
SOLVED!!!!
If you will practice this you timing will decrease to 1 minute and If you did not understood this you can visit my youtube channel and watch my video.
MY VIDEO - https://www.youtube.com/watch?v=LLX3xY1JLr8
STAY TUNED FOR MORE TUTORIALS :) GUYS PLEASE SUBSCRIBE MY CHANNEL AND LIKE MY VIDEO AND IF YOU HAVE ANY DOUBT PLEASE COMMENT IT IN THE COMMENT SECTION. AND ALSO SHARE THIS VIDEO TO YOUR CUBER FRIENDS.
CUBICE
Basically in the beginners method there are 7 STEPS. So first I will tell you all the steps.
THE 7 STEPS ARE :
1) BOTTOM CROSS
2) 1st LAYER
3) 2nd LAYER
4) TOP CROSS
5) TOP CROSS ORIENTATION
6) CORNER PLACING
7) CORNER ORIENTATION
Now lets discuss the steps :
BOTTOM CROSS : Make a cross on the bottom edge with the correct orientation.
1st LAYER : Complete the first layer by inserting corners.
2nd LAYER : Complete the second layer by inserting the edges.
TOP CROSS : There are 4 cases - A DOT
- L SHAPED
- A LINE ( KEEP IT HORIZONTALLY )
- CROSS ALREADY MADE
Just use this algorithm to make the cross - F R U R' U' F'
TOP CROSS ORIENTATION : There are 2 cases - TWO EDGES MATCHING DIAGONALLY
- TWO EDGES MATCHING IN A LINE
For 1st case keep the 1st edge on back and 2nd on right and use the algorithm - R U R' U R U2 R'
For 2nd case keep the line in horizontal position and do this algorithm - R U R' U R U2 R' then you will get the 1st case.
CORNER PLACING : Use this algorithm twice or thrice to get all the corners at the correct place but not in correct orientation. - U R U' L' U R' U' L
CORNER ORIENTATION : Keep the corner on right side and do this algorithm and the do U or U' to bring the next corner. - (R' D' R D) (R' D' R D)
SOLVED!!!!
If you will practice this you timing will decrease to 1 minute and If you did not understood this you can visit my youtube channel and watch my video.
MY VIDEO - https://www.youtube.com/watch?v=LLX3xY1JLr8
STAY TUNED FOR MORE TUTORIALS :) GUYS PLEASE SUBSCRIBE MY CHANNEL AND LIKE MY VIDEO AND IF YOU HAVE ANY DOUBT PLEASE COMMENT IT IN THE COMMENT SECTION. AND ALSO SHARE THIS VIDEO TO YOUR CUBER FRIENDS.
CUBICE
No comments:
Post a Comment